Quiz · Hard
Multi-step numerical problems on composite walls, lumped cooling, radiation, Dittus-Boelter, LMTD and effectiveness.
A wall (k = 1.2 W/m·K, L = 0.3 m, A = 10 m²) has faces at 25°C and -5°C. The heat rate is:
3.6 kW
120 W
1200 W
400 W
q = kAΔT/L = 1.2 x 10 x 30 / 0.3 = 1200 W.
A wall: 0.2 m brick (k = 0.7) plus 0.1 m insulation (k = 0.05). The overall ΔT is 40 K, area 1 m². Ignoring films, the heat rate is:
2.3 W
17.5 W
56 W
140 W
R = 0.2/0.7 + 0.1/0.05 = 0.286 + 2.0 = 2.286 K/W, so q = 40/2.286 = 17.5 W. The insulation holds 87% of the resistance.
A 10 m pipe, r1 = 0.05 m, r2 = 0.075 m, insulation k = 0.04 W/m·K, temperatures 150°C inside and 30°C outside. The heat loss is closest to:
7,440 W
74 W
1,490 W
744 W
q = 2πkLΔT/ln(r2/r1) = 2π(0.04)(10)(120)/ln1.5 = 301.6/0.4055 = 744 W.
The critical radius of insulation for a cylinder with k = 0.1 W/m·K and h = 10 W/m²·K is:
1 m
10 cm
1 mm
1 cm
r_c = k/h = 0.1/10 = 0.01 m.
A steel sphere, 2 cm diameter, k = 40 W/m·K, h = 100 W/m²·K. Is the lumped model valid?
It depends on temperature only
Yes: Bi = 0.008
No: Bi = 0.5
No: Bi = 8
L_c = V/A = D/6 = 0.00333 m. Bi = hL_c/k = 100 x 0.00333/40 = 0.0083, much less than 0.1.
The same sphere (ρ = 7800, c_p = 470, h = 100 W/m²K, V/A = 0.00333 m). How long to cool until the temperature difference is 10% of the initial?
About 1220 s
About 28 s
About 281 s
About 122 s
τ = ρ c_p (V/A)/h = 7800 x 470 x 0.00333/100 = 122 s. t = τ ln(10) = 281 s. 122 s would only reduce it to 37%.
A surface at 500 K, ε = 0.8, area 2 m², radiates to large surroundings at 300 K. The net radiation is closest to:
4.9 kW
49 kW
1.5 kW
12 kW
q = 0.8(5.67e-8)(2)(500⁴ - 300⁴) = 0.8 x 5.67e-8 x 2 x 5.44e10 = 4.9 kW.
Water (Pr = 5, k = 0.6 W/m·K) flows in a 25 mm tube at Re = 50,000 and is heated. Dittus-Boelter gives h of closest to:
600 W/m²K
250 W/m²K
6,000 W/m²K
60,000 W/m²K
Nu = 0.023 x 50000^0.8 x 5^0.4 = 251. h = Nu k/D = 251 x 0.6/0.025 = 6,000 W/m²K.
Counterflow: hot oil cools from 150°C to 90°C, cold water heats from 30°C to 70°C. The LMTD is:
60 K
70 K, the arithmetic mean
55.8 K
69.5 K
ΔT1 = 150 - 70 = 80, ΔT2 = 90 - 30 = 60; LMTD = 20/ln(80/60) = 69.5 K. 55.8 K is the parallel-flow value (120 and 20).
Using the LMTD of 69.5 K, U = 500 W/m²K and q = 500 kW. The required area is closest to:
7.2 m²
28.8 m²
144 m²
14.4 m²
A = q/(U ΔT_lm) = 500,000/(500 x 69.5) = 14.4 m².
A counterflow exchanger has NTU = 2 and C_r = 0.5. The effectiveness is closest to:
0.63
0.50
0.77
0.89
ε = (1 - e^-1)/(1 - 0.5 e^-1) = 0.632/0.816 = 0.77. The value 0.63 is 1 - e^-NTU with NTU = 1, a common slip.
2 kg/s of water (c_p = 4180 J/kg·K) is heated from 20°C to 60°C. The duty is:
8.4 MW
501 kW
334 kW
167 kW
q = m c_p ΔT = 2 x 4180 x 40 = 334,400 W.
With h_i = 2000, h_o = 500 W/m²K and a fouling resistance 0.0004 m²K/W (thin wall), U is closest to:
400 W/m²K
345 W/m²K
1,250 W/m²K
2,900 W/m²K
1/U = 1/2000 + 0.0004 + 1/500 = 0.0005 + 0.0004 + 0.002 = 0.0029, so U = 345 W/m²K. The outer film dominates.
A pin fin (d = 5 mm, k = 200 W/m·K, h = 50 W/m²K, L = 50 mm, adiabatic tip). The fin efficiency tanh(mL)/(mL) is closest to:
0.61
0.86
0.95
0.50
m = sqrt(4h/(kd)) = sqrt(200) = 14.1 /m; mL = 0.707; tanh = 0.609; η = 0.609/0.707 = 0.86.
The Sun's surface is about 5800 K. By Wien's law the peak wavelength is closest to:
5 μm
0.05 μm
50 μm
0.5 μm
λ_max = 2898/5800 = 0.50 μm, in the visible range.