StudyFox
कीमतेंब्लॉगएक्सटेंशनमुफ़्त टूल
  • कीमतें
  • ब्लॉग
  • एक्सटेंशन
  • मुफ़्त टूल
  • शुरू करेंसाइन इन
StudyFox

अपने नोट्स, PDF और स्लाइड्स को फ़्लैशकार्ड, क्विज़, नोट्स और माइंड मैप में बदलें।

StudyFox खोलें

स्टडी टूल्स

  • होमवर्क हेल्पर
  • नोट मेकर
  • फ़्लैशकार्ड मेकर
  • क्विज़ मेकर
  • माइंड मैप मेकर

प्रोडक्ट

  • कीमतें
  • Chrome एक्सटेंशन
  • मुफ़्त एक्सटेंशन
  • स्टडी सेट देखें
  • ब्लॉग

सहायता

  • सहायता केंद्र
  • संपर्क करें
  • गोपनीयता नीति
  • सेवा की शर्तें

तुलना करें

  • Chegg का विकल्प
  • Course Hero का विकल्प
  • Coursology का विकल्प
  • Photomath का विकल्प
  • Gauthmath का विकल्प
  • PhotoSolve का विकल्प
  • CollegeTools का विकल्प
  • Transcript का विकल्प
  • SmartSolve का विकल्प
  • Homeworkify का विकल्प
  • AnswersAi का विकल्प
  • StudyX का विकल्प
  • Quizlet का विकल्प
  • Anki का विकल्प
  • Knowt का विकल्प
  • Brainscape का विकल्प
  • सभी तुलनाएँ

© 2026 StudyFox AI. सर्वाधिकार सुरक्षित।

  • X
  • Discord
  • Instagram
ExploreEngineering & TechCivil EngineeringGeotechnical Calculations: Settlement, Earth Pressure and Bearing

Quiz · Hard

Geotechnical Calculations: Settlement, Earth Pressure and Bearing

Numeric problems on phase relations, consolidation, earth pressure, slopes and piles.

by Kill h.12 questionsCreated Nov 20, 2026, 08:27 PM
Civil Engineering· GeotechnicalTags#geotechnical#problems#exam

12 questions

  1. 1

    A soil has Gs = 2.70, e = 0.65 and is saturated. What is its water content?

    • A

      17.3%

    • B

      65%

    • 24.1%

    • D

      38%

    w = Se/Gs = 0.65/2.70 = 0.241.

  2. 2

    Gs = 2.65 and e = 0.60. Dry unit weight is closest to

    • 16.3 kN/m³

    • B

      20.6 kN/m³

    • C

      26.0 kN/m³

    • D

      10.2 kN/m³

    γd = Gs γw/(1 + e) = 2.65(9.81)/1.6 = 16.25 kN/m³.

  3. 3

    Emax = 0.90, emin = 0.40, e = 0.55. The relative density and classification are

    • 70%, dense

    • B

      30%, loose

    • C

      70%, very dense

    • D

      35%, medium

    Dr = (0.90 − 0.55)/(0.90 − 0.40) = 0.70, in the 65 to 85% dense range.

  4. 4

    A 4 m thick NC clay layer: Cc = 0.30, e0 = 0.90, σ'0 = 100 kPa, Δσ = 50 kPa. Primary consolidation settlement is closest to

    • A

      64 mm

    • B

      222 mm

    • 111 mm

    • D

      0.5 m

    Sc = (0.3 × 4/1.9) log(150/100) = 0.632 × 0.176 = 0.111 m.

  5. 5

    A 4 m clay layer drains at top and bottom (cv = 2×10⁻⁷ m²/s). Time for 50% consolidation (T = 0.197)?

    • A

      about 92 days

    • about 46 days

    • C

      about 184 days

    • D

      about 12 days

    Hdr = 2 m; t = 0.197 × 4/2×10⁻⁷ = 3.94×10⁶ s ≈ 45.6 days. Using Hdr = 4 m would give 4 times longer.

  6. 6

    Seepage under a dam: H = 6 m, k = 1×10⁻⁵ m/s, Nf = 4, Nd = 10. Flow per meter of dam is

    • A

      6×10⁻⁵ m³/s

    • B

      1.5×10⁻⁴ m³/s

    • C

      2.4×10⁻⁶ m³/s

    • 2.4×10⁻⁵ m³/s

    q = kH Nf/Nd = 10⁻⁵ × 6 × 0.4.

  7. 7

    A sand (c = 0, φ = 30°) has σ3 = 100 kPa at failure. σ1 is

    • A

      200 kPa

    • B

      173 kPa

    • 300 kPa

    • D

      130 kPa

    σ1 = σ3 tan²(60°) = 3σ3.

  8. 8

    A 6 m high smooth wall retains dry sand (γ = 18 kN/m³, φ = 30°). Active thrust per meter and its location are

    • 108 kN/m at 2 m above the base

    • B

      324 kN/m at 2 m above the base

    • C

      108 kN/m at 3 m above the base

    • D

      54 kN/m at 2 m above the base

    Pa = ½(1/3)(18)(36) = 108 kN/m, acting at H/3. Using Kp gives 324 kN/m.

  9. 9

    A strip footing on clay (cu = 50 kPa) at the surface with FS = 3 and Nc = 5.14 has allowable bearing pressure of

    • A

      257 kPa

    • B

      50 kPa

    • C

      17 kPa

    • 86 kPa

    qult = 5.14(50) = 257 kPa. Divide by 3 = 85.7 kPa.

  10. 10

    Pile end bearing in clay with cu = 80 kPa and diameter 0.4 m is closest to

    • A

      720 kN

    • 90 kN

    • C

      36 kN

    • D

      25 kN

    Qp = 9 cu Ap = 9 × 80 × 0.1257 = 90.5 kN. 720 forgets the area.

  11. 11

    An infinite dry sand slope with φ = 32° is inclined at 20°. The factor of safety is

    • A

      0.58

    • 1.72

    • C

      1.60

    • D

      2.5

    FS = tan32°/tan20° = 0.625/0.364.

  12. 12

    A fill has field γd = 17.6 kN/m³ and lab maximum γd = 18.5 kN/m³. If the specification requires 95% relative compaction, the fill

    • A

      fails (RC = 90%)

    • B

      fails (RC = 105%)

    • C

      cannot be judged without moisture

    • just passes (RC = 95.1%)

    RC = 17.6/18.5 = 0.951. Moisture only matters as it affects density, which is already measured.