Quiz · Easy
Short visual questions using the stress-strain curve, eutectic phase diagram and S-N curve.
In this stress-strain curve, which point is the ultimate tensile strength?
The origin
The yield point
The fracture point
The highest point of the curve
UTS is the maximum engineering stress. The yield point lies earlier and fracture later, at lower stress.
What does the slope of the straight initial part represent?
Toughness
Young's modulus
Yield strength
Poisson's ratio
Slope = stress/strain = E.
In the eutectic diagram, what is the red point?
Melting point of A
Eutectic point
Solvus
Peritectic point
The liquid transforms at constant temperature into alpha + beta at the lowest-melting composition.
An alloy cooling slowly from the liquid at the eutectic composition ends as:
Pure liquid
Pure beta
Alpha + beta
Pure alpha
Eutectic reaction: L -> alpha + beta.
In the S-N plot, the flat blue curve level represents:
Endurance limit
Yield strength
Creep rate
Fracture toughness
Below the endurance limit, steel is expected to survive indefinitely.
Why is the aluminum curve different from the steel curve?
It has no true endurance limit
It has higher modulus
It never fails
It only fails by creep
Aluminum's S-N curve keeps falling, so fatigue strength at a chosen life is quoted.