Quiz · Easy
Visual questions on line types, third-angle views and dimensioning.
Which row of the chart is the center line?
Third from the top, long-short-long dashes
Second from the top, short dashes
Fourth, with arrowheads
First, the thick continuous line
The center line is long dash, short dash, long dash; short even dashes are hidden lines.
What type of projection is shown, and which view is above the front view?
First-angle, the right view
First-angle, the top view
Third-angle, the bottom view
Third-angle, the top view
The top view sits above the front view and the right view is to its right: third angle.
In the three-view drawing, what does the horizontal line in the right side view show?
A hidden hole
A cutting plane
A center line
The edge of the step
The step lower surface meets the higher face along a visible edge.
On the plate, what does the dimension 25 locate?
The plate height
The distance from the right edge
The hole center from the bottom edge
The hole diameter
The 25 dimension runs from the bottom edge to the hole center line.
The dimension 50 on this plate is:
The overall height
The hole spacing
The hole diameter
The thickness
The vertical dimension at the right spans the whole plate height.
The symbol before the 20 in this drawing means:
Diameter
Radius
Depth
Square
The diameter symbol (a circle with a slash).