Quiz · Hard
Multi-step surveying calculations on tapes, total stations, coordinates, traverse adjustments and earthwork.
For the same traverse the linear misclosure is
0.09 m
0.064 m
0.01 m
0.0025 m
√(0.05² + 0.04²) = 0.064 m.
A photo with f = 152 mm and flying height 1,520 m above ground has scale
1:1,000
1:100,000
1:152
1:10,000
S = f/H = 0.152/1520 = 1/10,000.
A 100.000 m steel tape (α = 11.6×10⁻⁶/°C), standardized at 20 °C, is used at 35 °C. The temperature correction for 100 m is
−0.0174 m
+0.0174 m
+0.174 m
+0.0017 m
C = αΔT L = 11.6e-6 × 15 × 100 = 0.0174 m.
A total station gives slope distance 150.00 m and a zenith angle of 85°. The horizontal distance is
13.07 m
150.58 m
149.43 m
12.78 m
HD = SD sin Z = 150 sin 85° = 149.43 m; VD = 13.07 m.
Points A (1000, 2000) and B (1300, 2400) (E, N): the distance AB and azimuth AB are
500 m, 36.87°
500 m, 53.13°
700 m, 36.87°
500 m, 143.13°
ΔE = 300, ΔN = 400; az = atan(ΔE/ΔN) = 36.87°. 53.13° mistakes ΔN/ΔE.
The azimuth of line AB is 80°. At B the angle to the right from A to C is 110°. The azimuth of BC is
10°
190°
30°
270°
Az_BC = Az_AB + 180° + α = 80 + 180 + 110 = 370° = 10°.
A traverse has ΣLat = +0.05 m, ΣDep = −0.04 m and perimeter 800 m. The compass rule correction to the latitude of a 200 m line is
−0.05 m
+0.0125 m
−0.0125 m
−0.04 m
C = −ΣLat × L/P = −0.05 × 200/800 = −0.0125 m.
A level sight 500 m long has a combined curvature and refraction correction of about
67 mm
0.17 mm
17 mm
170 mm
0.0675 × 0.5² = 0.0169 m. 67 mm would be for 1 km.
For a vertical aerial photograph, an object taller than the surroundings is displaced
radially away from the nadir
toward the nadir
perpendicular to the flight line
not at all
Relief displacement increases with height and distance from the nadir point.
A level circuit of 4 km has an allowable misclosure of 12 mm√K. The allowable misclosure is
12 mm
48 mm
6 mm
24 mm
12 × √4 = 24 mm.
The prismoidal formula with L = 12 m, A1 = 30 m², Am = 44 m² and A2 = 50 m² gives a volume of
480 m³
512 m³
528 m³
1,020 m³
V = (12/6)(30 + 4×44 + 50) = 2 × 256 = 512 m³. Average end area gives 12 × 40 = 480 m³, which ignores the mid-section.
Interior angles measured in a quadrilateral traverse total 360°00'40". The correction to each angle (equal distribution) is
−40"
−10"
+10"
−160"
Misclosure is +40"; divided by 4 angles gives −10" each.