Quiz · Hard
Numerical and applied questions on net thrust, specific impulse, delta-v, Brayton efficiency, bypass ratio and nozzle pressure thrust.
An engine passes 80 kg/s of air with exhaust speed 500 m/s at flight speed 200 m/s (pe = p0). The net thrust is:
40,000 N
24,000 N
16,000 N
56,000 N
N. 40,000 N is the gross thrust , ignoring the ram drag.
A rocket engine produces 2000 kN while burning 650 kg/s of propellant. Its Isp is about:
3.1 s
3080 s
314 s
205 s
s.
A stage with s has a mass ratio of 4. Its ideal is about:
6120 m/s
4414 m/s
1800 m/s
17,660 m/s
m/s. Using the ratio itself instead of ln gives 17,660.
Ideal Brayton cycle, pressure ratio 30, γ = 1.4. The thermal efficiency is about:
38%
62%
75%
50%
, so .
m/s and m/s. The propulsive efficiency is:
67%
100%
50%
80%
. 67% is , a common slip.
A turbofan passes 400 kg/s through the fan bypass and 50 kg/s through the core. The bypass ratio is:
8
0.125
9
50
BPR = bypass flow / core flow = 400/50 = 8.
An over-expanded nozzle at sea level has kPa, kPa and m². The pressure thrust term is:
About +25.7 kN
Zero
About −25.7 kN
About −51 kN
N. The negative sign means this term reduces thrust.
An electric thruster generates 0.1 N using 3.4×10⁻⁶ kg/s of xenon. Its Isp is about:
30 s
300 s
30,000 s
3000 s
s.
Two identical stages, each with s and mass ratio 3, burn in sequence (ignore dropped dry mass effects beyond the ratios). The total ideal is about:
3230 m/s
6470 m/s
8830 m/s
1100 m/s
Each stage gives m/s, so the total is 6466 m/s. The delta-v of stages in series adds.
An aircraft flies at Mach 0.8 where the static temperature is 250 K. The total temperature at the compressor face is about:
250 K
320 K
282 K
200 K
K.
For γ = 1.4, what stagnation-to-ambient pressure ratio first chokes a convergent nozzle?
About 1.89
About 1.4
About 3.0
About 0.53
The critical pressure ratio is . The inverse, 0.53, is the static-to-total ratio at the throat.
At the same mass ratio, doubling the specific impulse doubles the ideal Δv.
True
False
is linear in Isp.
An airliner uses a high bypass ratio and fuel flow is 0.4 kg/s for 40 kN of thrust. Its TSFC is:
1.0×10⁻⁴ kg/(N s)
1.0×10⁻⁵ kg/(N s)
0.1 kg/(N s)
1.0×10⁻⁶ kg/(N s)
TSFC = 0.4/40,000 = 1.0×10⁻⁵ kg/(N s), i.e. 10 g/(kN s).
Why does increasing compressor pressure ratio raise thermal efficiency but eventually give diminishing benefits in practice?
Because the Brayton efficiency falls above a pressure ratio of 10
Because the combustor stops burning at high pressure
Because the turbine cannot drive the compressor
Efficiency gains flatten while compressor work, weight and material temperature limits grow
Ideal efficiency keeps rising as but with diminishing slope, while real compressors get heavier, hotter and less efficient.
What is the main reason a scramjet is needed above about Mach 5?
Slowing the flow to subsonic speed would cause excessive total pressure loss and heating
It has no inlet
It uses a propeller
Supersonic flow cannot burn fuel
A scramjet keeps the flow supersonic through the combustor, so it avoids the strong normal shock and extreme static temperatures of a ramjet at hypersonic speed.
A rocket has thrust 500 kN and propellant flow 170 kg/s at sea level. Compared with vacuum, its Isp will be:
Higher at sea level
The same
Lower at sea level
Zero at sea level
Ambient pressure subtracts from pressure thrust at sea level, so measured Isp is lower than vacuum Isp for the same engine.
Why does a high-bypass fan produce less thrust at altitude and high speed than at takeoff?
Fan blades stall at altitude permanently
Fuel burns less efficiently only at high temperature
The compressor ratio falls to 1
Falling air density reduces mass flow, and the ram drag from a high flight speed reduces net thrust
Thrust lapses with density, and drops as rises, especially for low jet velocity engines.